TEA app use
Tap Welcome to TEA and proceed to the Treatments screen. Allow TEA to turn on the Bluetooth, if requested.
Tap Bluetooth Not Connected and wait for popup Searching Bluetooth devices to disappear. If your TEA device is nearby and is turned on, you will see it listed as TRI TEA. Tap that name and wait for popup Connecting device to disappear and the image of TEA device on the screen to turn grey. You are now connected to the TEA device.
You cannot modify any stimulation parameters (except for amplitude) on the phone! On the tablet, you can add a Treatment by tapping + in the top right corner and selecting one of the Treatments, for example Custom. If the Custom treatment is not defined, tap the Edit icon to the right from Custom treatment and in the popup window, type the Pulse Width (us) from 100 to 500, Frequency (Hz) from 1 to 100, Burst On and Burst Off (ms) from 100 to 10000, Time (min) from 10 to 240, Intensity from 1 to 10, and Polarity (select Monophasic or Biphasic). Tap Save to create the Custom treatment. Then tap on Custom to select it, which is reflected by the words Device 1 - Custom appearing above the top bar. The selected treatment is automatically sent to the device and is saved for future use, so you don't need to repeat step 4 every time after turning on the device. Instead, go directly to the step 5 or 6.
Apply the treatment using the app: tap the Power button on the device image, it will turn green and the switch on the device display image will change from OFF to ON. Stop the treatment by tapping the Power button again, it will turn white again and the switch on the device display image will change from ON to OFF. Adjust the treatment amplitude by tapping - and + buttons on the device image.
Apply the treatment using the device (alternative to step 5 above): press the Power button on the device, and the switch on the device display will change from OFF to ON. Stop the treatment by pressing the Power button again, and the switch on the device display will change from ON to OFF. Adjust the treatment amplitude by pressing - and + buttons on the device.
Turn off the device by pressing and holding the Power button on the device (for about 4 seconds).
Software Bill of Materials (SBOM) is a document that helps you to understand and manage potential impact of identified vulnerabilities in the TEA device. As needed, SBOM also allows you to apply countermeasures to maintain the device’s safety and effectiveness. Click the link below to download up-to-date SBOM in either of two machine-readable formats: